https://proaudioaccessories.com Sun, 28 Jun 2026 20:02:35 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://proaudioaccessories.com/2023/05/1-ready-to-ship-nanopara-parametric-eq-pedal-handmade-55cm/ https://proaudioaccessories.com/2023/05/1-ready-to-ship-nanopara-parametric-eq-pedal-handmade-55cm/#comments Tue, 23 May 2023 07:20:06 +0000 https://proaudioaccessories.com/2023/05/1-ready-to-ship-nanopara-parametric-eq-pedal-handmade-55cm/




NanoPara Parametric EQ pedal by Sine Effect Electronics. Description: The nanoPara is a new 1-band parametric EQ pedal from Sine Effect Electronics. After many years of trying to fit the goods into a small 5x5cm box (1.97) – without any compromises – it has finally been accomplished! The nanoPara is analogue, fully-parametric, True Bypass and low-noise. This pedal could be very useful for guitarists and bassists looking to adjust their tone without taking up much pedalboard space. All Sine Effect pedals are handmade in Glasgow, Scotland. Fully-featured, bandpass parametric equaliser. Accepts both 9 and 18V DC supplies. Adjustable range covers electric guitar and bass. Boost or cut by +/-15dB. Up to +10dB recovery gain (using VOL control). Operating Voltage: 9-18V DC mains adaptor (DOES NOT USE BATTERY). Input/Output Impedance: 1 Megaohm/680 ohm. Adjustable frequency range: 50Hz-5KHz. Dimensions: 10×6.5x5cm (including sockets and knobs). As these pedals are made completely by hand, there may be some slight imperfections that you wouldn’t get from factory robots. Every effort is made to ensure that the pedals look cool and sound good, though! This item is in the category “Musical Instruments & DJ Equipment\Pro Audio Equipment\Signal Processors & Effects”. The seller is “sine-effect” and is located in this country: GB. This item can be shipped worldwide.

• Frequency Range: 20Hz-24KHz
• Input/Output Ports: 2.1mm DC In, Centre-negative, 6.35 mm (1/4 in) TRS/TS In, 6.35 mm (1/4 in) TRS/TS Out, 6.35 mm (1/4\
• MPN: NNP1
• Effect/Enhancement: Parametric Equalisation, Band-pass filter
• Analogue/Digital: Analogue
• Colour: Black
• Brand: Sine Effect Electronics
• Form Factor: Pedal
• Type: Equaliser
• Unit Type: Unit
• Number of Channels: 1
• Model: microPara
• Features: Active, True Bypass, Low noise, +/-15dB gain
• Number of Sounds: A lot
• Country/Region of Manufacture: United Kingdom

]]> https://proaudioaccessories.com/2023/05/1-ready-to-ship-nanopara-parametric-eq-pedal-handmade-55cm/feed/ 0 https://proaudioaccessories.com/2023/05/1-week-wait-h24-hpf-pedal-24dboct-handmade/ https://proaudioaccessories.com/2023/05/1-week-wait-h24-hpf-pedal-24dboct-handmade/#comments Sun, 14 May 2023 22:33:03 +0000 https://proaudioaccessories.com/2023/05/1-week-wait-h24-hpf-pedal-24dboct-handmade/




H24 high-pass filter pedal by Sine Effect Electronics. Description: The H24 is a steep high-pass filter pedal by Sine Effect Electronics. This filter pedal has an adjustable frequency of 25-400Hz, and a slope of 24dB/octave (4th-order). Certain components are matched by hand to ensure a steep curve. This pedal is ideal for electric bassists and guitarists who wish to tighten up their low-end. The pedal outputs unity gain and is designed to be low-noise. Operating Voltage: 9-18V DC, centre-negative. Input/Output Impedance: 1 Megaohm/680 ohm. Dimensions: 48x100x50mm (including sockets and knobs). Please get in touch to request any further information. As these pedals are made completely by hand, there may be some slight imperfections that you wouldn’t get from factory robots. Every effort is made to ensure that the pedals look cool and sound good, though! This item is in the category “Musical Instruments & DJ Equipment\Pro Audio Equipment\Signal Processors & Effects”. The seller is “sine-effect” and is located in this country: GB. This item can be shipped worldwide.

• Frequency Range: 25-400Hz
• Input/Output Ports: 2.1mm DC In, Centre-negative, 6.35 mm (1/4 in) TRS/TS In, 6.35 mm (1/4 in) TRS/TS Out, 6.35 mm (1/4\
• MPN: H241
• Effect/Enhancement: High-Pass Filtering
• Analogue/Digital: Analogue
• Colour: Blue
• Brand: Sine Effect Electronics
• Form Factor: Pedal
• Type: Single-Effect Processor
• Number of Channels: 1
• Model: H24
• Features: True Bypass, Treble and Bass controls, High gain, Active
• Number of Sounds: A lot
• Country/Region of Manufacture: United Kingdom

]]> https://proaudioaccessories.com/2023/05/1-week-wait-h24-hpf-pedal-24dboct-handmade/feed/ 0 https://proaudioaccessories.com/2021/09/4-week-wait-megapara-parametric-eq-pedal-handmade-guitar-and-bass/ https://proaudioaccessories.com/2021/09/4-week-wait-megapara-parametric-eq-pedal-handmade-guitar-and-bass/#comments Wed, 08 Sep 2021 02:43:08 +0000 http://proaudioaccessories.com/2021/09/4-week-wait-megapara-parametric-eq-pedal-handmade-guitar-and-bass/





MegaPara Parametric EQ pedal by Sine Effect Electronics. Description: The MegaPara is a 3-band parametric EQ pedal for electric, acoustic and bass guitar. It is designed to be as useful, flexible and reliable as possible in any live or studio situation. Based on professional rack technology, the MegaPara is hand-soldered and assembled, and is the result of years of customer feedback and parametric EQ experience. This pedal covers the frequency range of most string instruments and is highly accurate, so that the musician truly calls the shots. Find your perfect tone, discover new ones and get rid of junk. Made by a guitarist with plenty of gigging and recording experience. You can see a demo of the MegaPara here (with the older appearance and name). 3 bands ranging from 25Hz to 16KHz, to suit bass, electric or acoustic guitar. Switchable Peak/Shelf modes on High and Low bands (+/-15dB gain in both modes). Pad or boost the input by 10dB. DC jack now on top of pedal. Operating Voltage: 9-18V DC mains adaptor or 9V PP3 Battery (not included). Input/Output Impedance: 1 Megaohm/680 ohm. Frequency Ranges: 25-400Hz, 150-2,500Hz, 1-16KHz. Accuracy: +/-5% (all controls). Please send a message if you have any questions about the MegaPara. Look us up on a popular social networking site for updates. All pedals by Sine Effect Electronics are designed and built in Glasgow, Scotland. As these pedals are made completely by hand, there may be some slight visual imperfections that you wouldn’t get from factory robots. Every effort is made to ensure that the pedals look cool and sound good, though! Photos taken by Marc Carruthers Photography. The item “4-WEEK WAIT MegaPara Parametric EQ Pedal Handmade Guitar and Bass” is in sale since Friday, March 5, 2021. This item is in the category “Musical Instruments\Pro Audio Equipment\Signal Processors & Effects”. The seller is “sine-effect” and is located in Glasgow, Glasgow (City o. This item can be shipped worldwide.

• Number of Channels: 1
• Model: MegaPara
• Input/Output Ports: 2.1mm DC In
• Effect/Enhancement: Band-pass filter
• Type: Equaliser
• Features: Band-pass or Shelf switches
• MPN: MGP3
• Brand: Sine Effect Electronics
• Form Factor: Pedal
• Frequency Range: 3

]]> https://proaudioaccessories.com/2021/09/4-week-wait-megapara-parametric-eq-pedal-handmade-guitar-and-bass/feed/ 0