https://proaudioaccessories.com Tue, 05 May 2026 18:05:58 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://proaudioaccessories.com/2021/11/lase-replacement-amplifier-qsc-kw181-kla181-k-sub-module-powered-speakers/ https://proaudioaccessories.com/2021/11/lase-replacement-amplifier-qsc-kw181-kla181-k-sub-module-powered-speakers/#comments Tue, 09 Nov 2021 06:03:11 +0000 http://proaudioaccessories.com/2021/11/lase-replacement-amplifier-qsc-kw181-kla181-k-sub-module-powered-speakers/






LASE K Series Professional Loudspeaker Sub Woofer Power-Amplifier Module. (Power Con Cable Included). Very Easy To Install. This Compatible Replacement for. QSC KLA181, KW181, K-SUB. Has same number of unique control features as the original plus locking IEC connection for a remote gain control. Controls : Power:on/off Gain ; Polarity:Rev / Normal; Mode: Normal / Boost; Front LEDs (On/Off/Limit). Indicators : Power / Stand By / Limit. Cooling : On Demand 50mm Variable speed fan. Amplifier Protection :Thermal Limiting/ Output over current / Over temperature muting. Transducer Protection : Thermal Limiting / Excursion Limiting. Frequency Response(+o/-0.3dB, 1W/8) : 34 Hz – 143Hz. Output Level (SPL) 135 dB. Channel separation : (Crosstalk) at 1 kHz. Balance Female XLR Input. Output Connector: Balanced male XLR Line Out. Remote Gain Control, locking IECpower connector. Operating voltage : 220 V / 110 V nominal 190-240 V / 90-130 V selectable. (L×W×D) : 14″ x 7.5″ x 4.5 (355.6mm x 190.5mm x 114.3mm). Packing dimension : 15″ x 10″ x 5 (381mm x 254mm x 127mm). Net weight :6.3lbs (2.85Kgm). Gross weight :7lbs(3.17Kgm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE Replacement Amplifier QSC KW181, KLA181, K-Sub Module Powered Speakers” is in sale since Friday, August 13, 2021. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Amplifiers”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Number of Channels: 1
• Model: LASE K Series
• Country/Region of Manufacture: Unknown
• Type: Power Amplifier Module
• Features: Amplified
• RMS Power: 1000 W continuous
• MPN: QSC KLA181, KW181, K-SUB
• Brand: LASE
• Form Factor: Modular

]]> https://proaudioaccessories.com/2021/11/lase-replacement-amplifier-qsc-kw181-kla181-k-sub-module-powered-speakers/feed/ 0 https://proaudioaccessories.com/2021/07/lase-neo-12-1000mr-12-mid-bass-neodymium-speaker-3-voice-coil/ https://proaudioaccessories.com/2021/07/lase-neo-12-1000mr-12-mid-bass-neodymium-speaker-3-voice-coil/#comments Fri, 23 Jul 2021 18:21:01 +0000 http://proaudioaccessories.com/2021/07/lase-neo-12-1000mr-12-mid-bass-neodymium-speaker-3-voice-coil/





NEW LASE NEO 12-1000MR – 12″ MidBass Speaker 3″ Voice Coil. Very high efficiency and extended linearity are special features of. Efficient heat dissipation is ensured by a radiator that is part of the basket design. The aluminum voice coil provides a properly aligned Q factor and high sensitivity. A specially designed shallow triple-roll surround guarantees low midrange distortion, and a fiberglass former voice coil, polycotton suspensions, and treated cone contribute to the. LASE NEO 12-1000MR’s. When mounted in compact size bass reflex enclosures, the good combination of short voice coil, very low mass, and suspension control makes the. An excellent choice for high power, 2-way satellite applications. Is a popular replacement speaker for EAW, Yorkville, Sonic, Martin Audio, and other subwoofer speaker systems. Professional/Concert Touring Midbass Driver. 3 Edgewound Aluminum Voice Coil on a fiberglass former. High Sensitivity and Low Distortion. Shaped shallow triple-roll damped surround. Primarily designed to be horn loaded in medium and long throw system. Inverted dust cap minimizes cone distortion, improves coupling to a phase plug. Frequency Response : 60 to 2,00 Hz. Sensitivity 100db 2.83/1 m. Voice Coil Diameter : 3. Weight :9.9 lbs / 4.49 kg. ONLY In the Lower 48 States. IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE NEO 12-1000MR 12 Mid Bass Neodymium Speaker 3 Voice Coil” is in sale since Thursday, March 8, 2018. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Speaker Drivers & Horns”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Model: LASE NEO 12-100MR
• Suited For: Mid Woofer Frequencies
• Type: Mid Woofer
• MPN: LASE NEO 12-1000 MR
• Brand: LASE

]]> https://proaudioaccessories.com/2021/07/lase-neo-12-1000mr-12-mid-bass-neodymium-speaker-3-voice-coil/feed/ 0 https://proaudioaccessories.com/2021/06/lase-replacement-amplifier-k-series-module-for-qsc-k8-k10-k12-powered-speaker/ https://proaudioaccessories.com/2021/06/lase-replacement-amplifier-k-series-module-for-qsc-k8-k10-k12-powered-speaker/#comments Sun, 27 Jun 2021 13:18:48 +0000 http://proaudioaccessories.com/2021/06/lase-replacement-amplifier-k-series-module-for-qsc-k8-k10-k12-powered-speaker/







LASE Replacement Amplifier K Series Module for QSC K12, K10, K8, KLA12 Powered Speaker. (Power Con Cable Included). Very Easy To Install. Professional Loudspeaker Bi-Amped Power-Amplifier Module, This Compatible Replacement for. QSC K8, K10, K12, KLA12. Has same number of unique control features as the original plus locking IEC connection for a remote gain control. Controls : Power – Gain A; Gain B- Mic/Line. LF Mode – Ext Sub/Norm/ Ent Sub. HF Mode – Vocal/ Boost / Flat. Indicators : Power, Signal A / Signal B / Stand By / Limit / Mic. Cooling : On Demand 50mm Variable speed fan. Amplifier Protection :Thermal Limiting/ Output over current / Over temperature muting. Transducer Protection : Thermal Limiting / Excursion Limiting. Power Output :1000 W continuous Class D (500 W LF, 500 W HF). (+o/-0.3dB, 1W/8) : 48 Hz – 20 kHz. Crossover Frequency : 1.7 Khz. 20 Hz – 20 kHz for 1 W. (Crosstalk) at 1 kHz. Balance Female XLR/1/4 Line/Mic. Stereo RCA Line Level Input. Dual Balanced male XLR Full range line level out / Balanced Male XLR ” Mix Out”. Remote Gain Control, locking IECpower connector. 0 V / 11. V nominal 190-240 V / 90-130 V selectable. Module Connect : SEE PICS. (L×W×D) : 14″ x 7.5″ x 4.5 (355.6mm x 190.5mm x 114.3mm). Packing dimension : 15″ x 10″ x 5. (381mm x 254mm x 127mm). Net weight :6.3lbs (2.85Kgm). Gross weight :7lbs(3.17Kgm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE Replacement Amplifier K Series Module for QSC K8, K10, K12 Powered Speaker” is in sale since Thursday, March 25, 2021. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Amplifiers”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Number of Channels: 2
• Model: LASE K Series
• Country/Region of Manufacture: Unknown
• Type: Power Amplifier
• Features: Amplified
• RMS Power: 1000 W continuous
• MPN: QSC K8 K10 K12
• Brand: LASE
• Form Factor: Modular

]]> https://proaudioaccessories.com/2021/06/lase-replacement-amplifier-k-series-module-for-qsc-k8-k10-k12-powered-speaker/feed/ 0 https://proaudioaccessories.com/2021/04/lase-spm-1000ab-bi-amp-power-amplifier-module-1000w-passive-into-active-2-way/ https://proaudioaccessories.com/2021/04/lase-spm-1000ab-bi-amp-power-amplifier-module-1000w-passive-into-active-2-way/#comments Fri, 09 Apr 2021 23:34:32 +0000 http://proaudioaccessories.com/2021/04/lase-spm-1000ab-bi-amp-power-amplifier-module-1000w-passive-into-active-2-way/






LASE SPM-1000AB Bi-Amp Power Amplifier 1000Watts Module. Convert your Passive Speaker into an Active Speaker. LASE SPM-1000AB Bi-amp Power Module. Is a high performance switching power amplifier. Efficient and easy installation, no need for a chamber or a compact(small enclosed space). Completely Enclosed for easy installation. Unprecedented power density, 2 channel power amplifier. Class D wiring amplifier. Efficient cooling system, 100% pure copper heat sink. XLR input and link connectors. Low-Pass Crossover 80Hz -250Hz 24db/oct. Comprehensive protection and warning. 15″ x 6.25″ x 4.25(381mm x 158.75mm x 107.95mm) Outer Lip. 14″ x 5.5″ x 3.75 (355.6mm x 139.7mm x 95.25mm). Packing dimension : 16″ x 9″ x 6. (406.4mm x 228.6mm x 152.4mm). Net weight :5lbs (2.26Kgm). Gross weight :5.5lbs(2.49Kgm). Mounting Hole Size : 0.1815″ x 0.288″ (4.61mm x 7.31mm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE SPM-1000AB Bi-Amp Power Amplifier Module 1000W (Passive into Active) 2 Way” is in sale since Thursday, July 9, 2020. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Amplifiers”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Number of Channels: 2
• Model: LASE SPM-1000AB
• Modified Item: No
• Country/Region of Manufacture: Unknown
• Custom Bundle: No
• Non-Domestic Product: No
• Type: Power Amplifier
• Features: DSP Controled
• RMS Power: 1000W @ 8 ohm
• MPN: LASE SPM-1000AB
• Brand: LASE
• Form Factor: Modular

]]> https://proaudioaccessories.com/2021/04/lase-spm-1000ab-bi-amp-power-amplifier-module-1000w-passive-into-active-2-way/feed/ 0 https://proaudioaccessories.com/2020/12/lase-neo-15-1000mr-15-mid-bass-neodymium-speaker-3-voice-coil/ https://proaudioaccessories.com/2020/12/lase-neo-15-1000mr-15-mid-bass-neodymium-speaker-3-voice-coil/#comments Tue, 01 Dec 2020 09:19:28 +0000 http://proaudioaccessories.com/2020/12/lase-neo-15-1000mr-15-mid-bass-neodymium-speaker-3-voice-coil/







NEW LASE NEO 15-1000 MR – 15″ MidBass Speaker 3″ Voice Coil. Very high efficiency and extended linearity are special features of. LASE NEO 15-1000 MR. Efficient heat dissipation is ensured by a radiator that is part of the basket design. The aluminum voice coil provides a properly aligned Q factor and high sensitivity. A specially designed shallow triple-roll surround guarantees low midrange distortion, and a fiberglass former voice coil, polycotton suspensions, and treated cone contribute to the. LASE NEO 15-1000 MR’s. When mounted in compact size bass reflex enclosures, the good combination of short voice coil, very low mass, and suspension control makes the. An excellent choice for high power, 2-way satellite applications. Is a popular replacement speaker for EAW, Yorkville, Sonic, Martin Audio, and other subwoofer speaker systems. Professional/ Concert Touring Mid bass Driver. 3 Edgewound Aluminum voice coil on a fiber glass Former. High Sensitivity and low distortion. Shaped shallow triple-roll damped surround. Primarily designed to be horn loaded in medium and long throw system. Inverted dust cap minimizes cone distortion, improves coupling to a phase plug. Frequency Response : 60 hz – 2,000 hz. Sensitivity : 101 db 2.83/1m. Voice Coil Diameter : 3. Weight : 11 lbs 7ozs (5.30 kgm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE NEO 15-1000MR 15 Mid Bass Neodymium Speaker 3 Voice Coil” is in sale since Thursday, March 8, 2018. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Speaker Drivers & Horns”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Model: LASE NEO 15-1000 MR
• Suited For: Mid Woofer Frequencies
• Type: Mid Woofer
• MPN: LASE NEO 15-1000 MR
• Brand: LASE

]]> https://proaudioaccessories.com/2020/12/lase-neo-15-1000mr-15-mid-bass-neodymium-speaker-3-voice-coil/feed/ 0 https://proaudioaccessories.com/2020/10/lase-lf18-3000-18-low-frequency-8-ohm-woofer-speaker-with-4-voice-coil/ https://proaudioaccessories.com/2020/10/lase-lf18-3000-18-low-frequency-8-ohm-woofer-speaker-with-4-voice-coil/#comments Mon, 26 Oct 2020 09:55:08 +0000 http://proaudioaccessories.com/2020/10/lase-lf18-3000-18-low-frequency-8-ohm-woofer-speaker-with-4-voice-coil/







LASE LF18-3000 18″ Low Frequency Woofer Speaker with 4″ Voice Coil. It is ideal for high quality professional bass reflex and bass-horn speaker systems. The LASE LF18-3000 uses a fiber-loaded cone assembly along with a high excursion triple roll, constant geometry surround, thereby providing a much smoother transition for the moving mass as it reaches its maximum excursion limits. Also included is a forced air venting system for reduced power compression. The LASE LF18-3000 is a popular replacement speaker for EAW, Yorkville, Sonic, Martin Audio, and other subwoofer speaker systems. High BL low frequency of 30.5T-M for a strong controlled deep, punchy bass. 4(100mm) diameter inside/outside copper voice coil on fiberglass former. Ventilated Voice Coil gap for reduced power compression. Dual spider design with silicon-based damping control. Triple roll surround and corrugated straight cone geometry. Good sensitivity, low distortion, extraordinary definition. Minimum Impedance : 6.5. Frequency Response: 35Hz to 1,000 KHz. Sensitivity: 96dB 2.83V/1m. Voice Coil Diameter: 4. Weight : 42.2 Lbs(19.14Kgms). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE LF18-3000 18 Low Frequency 8 Ohm Woofer Speaker with 4 Voice Coil” is in sale since Thursday, October 24, 2019. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Speaker Drivers & Horns”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Model: 18LW3000
• Suited For: Woofer Frequencies
• Type: Sub-Woofer
• MPN: 18LW3000
• Brand: LASE

]]> https://proaudioaccessories.com/2020/10/lase-lf18-3000-18-low-frequency-8-ohm-woofer-speaker-with-4-voice-coil/feed/ 0 https://proaudioaccessories.com/2020/10/lase-spm-1000s-sub-woofer-power-amplifier-module-1000w-passive-sub-into-active/ https://proaudioaccessories.com/2020/10/lase-spm-1000s-sub-woofer-power-amplifier-module-1000w-passive-sub-into-active/#comments Thu, 22 Oct 2020 05:36:58 +0000 http://proaudioaccessories.com/2020/10/lase-spm-1000s-sub-woofer-power-amplifier-module-1000w-passive-sub-into-active/










LASE SPM-1000S SUB Woofer Power Amplifier 1000Watts Module. Convert your Passive Sub into an Active Woofer. LASE SPM-1000S SUB Woofer Power Module. Is a high performance switching power amplifier. Efficient and easy installation, no need for a chamber or a compact(small enclosed space). Completely Enclosed for easy installation. Unprecedented power density, 2 channel power amplifier. Class D wiring amplifier. Efficient cooling system, 100% pure copper heat sink. In/Out Phase switch 0 – 180. XLR input and link connectors. Low-Pass Crossover 80Hz -250Hz 24db/oct. Comprehensive protection and warning. Power Output : 1000W ± 5%. Volume Control : Line Volume. Residual Noise(Short Circuit input). (Crosstalk) at 1 kHz. 3-pin XLR Combo, electronically balanced. Protection : DC / Short circuit/High Temp. Soft Startup Protect : 1-2 sec. Operating voltage : AC 115V 50Hz/60Hz. 15″ x 6.25″ x 4.25(381mm x 158.75mm x 107.95mm) Outer Lip. 14″ x 5.5″ x 3.75 (355.6mm x 139.7mm x 95.25mm). Packing dimension : 16″ x 9″ x 6. (406.4mm x 228.6mm x 152.4mm). Net weight :5lbs (2.26Kgm). Gross weight :5.5lbs(2.49Kgm). Mounting Hole Size : 5.5″ x 11.5″ (139.7mm x 292.1mm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE SPM-1000S SUB Woofer Power Amplifier Module 1000W (Passive Sub into Active)” is in sale since Friday, March 6, 2020. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Amplifiers”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation, Canada, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion, Montserrat.

• Number of Channels: 2
• Model: LASE SPM-1000S
• Modified Item: No
• Country/Region of Manufacture: Unknown
• Custom Bundle: No
• Non-Domestic Product: No
• Type: Power Amplifier
• Features: DSP Controled
• RMS Power: 1000W @ 8 ohm
• MPN: LASE SPM-1000S
• Brand: LASE
• Form Factor: Modular

]]> https://proaudioaccessories.com/2020/10/lase-spm-1000s-sub-woofer-power-amplifier-module-1000w-passive-sub-into-active/feed/ 0 https://proaudioaccessories.com/2020/08/lase-ata-style-flight-case-for-pioneer-ddj1000-ddj1000srt-with-glide-wheels/ https://proaudioaccessories.com/2020/08/lase-ata-style-flight-case-for-pioneer-ddj1000-ddj1000srt-with-glide-wheels/#comments Sun, 16 Aug 2020 12:22:17 +0000 http://proaudioaccessories.com/2020/08/lase-ata-style-flight-case-for-pioneer-ddj1000-ddj1000srt-with-glide-wheels/









Controller & Laptop not included for Display Only! This Is Our NEW. LASE ATA Style Case For Pioneer DDJ1000 & DDJ1000 SRT with Glide on Wheels. Light Weight And Strong. Are designed as a Controller Case which can be used to store the. Well as other designed controllers. It also protects them from dust and other airborne pollutants that can destroy or damage your equipment. Will protect your gear comfortably, it is lightweight and easy to carry. 1\4 Black Laminate Ply Construction. Chrome Steel and Aluminum Hardware. Fully Foam Lined Interior. Chrome Recessed Lockable Latches. Height :8.5 (215.9mm). Width :20.25(514.35mm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE ATA Style Flight Case For Pioneer DDJ1000 & DDJ1000SRT with Glide & Wheels” is in sale since Wednesday, July 31, 2019. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Cases, Racks & Bags”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation, Montserrat.

• Brand: LASE
• Model: LASE ATA Pioneer DDJ-!000 Case
• Type: LASE ATA Case
• To Fit: Controller
• Material: 1/4″ Black Laminate Ply Construction.
• MPN: LASE ATA Pioneer DDJ-!000
• Features: Flight/Road-Ready

]]> https://proaudioaccessories.com/2020/08/lase-ata-style-flight-case-for-pioneer-ddj1000-ddj1000srt-with-glide-wheels/feed/ 0 https://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sr-sr2-ddj-rr-controller-with-glide/ https://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sr-sr2-ddj-rr-controller-with-glide/#comments Thu, 13 Aug 2020 19:24:30 +0000 http://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sr-sr2-ddj-rr-controller-with-glide/









The Equipment is not included for Display Only. This Is Our NEW. LASE DDJ -SR / SR2 / DDJ-RR Pioneer Euro Style Case with Glide. Light Weight And Strong. Are designed as a CDJ Case which can be used to store Pioneer DDJ-SR / SR2 / DDJ-RR. It also protects them from dust and other airborne pollutants that can destroy or damage your equipment. Will protect your gear comfortably, lightweight and easy to carry. 1\4 Black Laminate Ply Construction. Chrome Steel and Aluminum Hardware. Fully Foam Lined Interior. Chrome Recessed Lockable Latches. Height :7.25 (184.15mm). Width : 14.5(368.3mm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE Euro Style Case For Pioneer DDJ-SR / SR2, DDJ-RR Controller with Glide” is in sale since Thursday, January 10, 2019. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Cases, Racks & Bags”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Model: LASE Euro Pioneer DDJ -SR2, DDJ-RR
• To Fit: CDs/DVDs
• Material: 1/4″ Black Laminate Ply Construction.
• Type: LASE Euro Case
• Features: Flight/Road-Ready
• MPN: LASE DDJ -SR Case
• Brand: LASE

]]> https://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sr-sr2-ddj-rr-controller-with-glide/feed/ 0 https://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sb3-ddj-rb-ddj-400-controller-with-glide/ https://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sb3-ddj-rb-ddj-400-controller-with-glide/#comments Sun, 02 Aug 2020 06:27:11 +0000 http://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sb3-ddj-rb-ddj-400-controller-with-glide/








The Equipment Are For Display Only. This Is Our NEW. LASE DDJ -SB3 Pioneer Euro Style Case With Glide. This Case Will Work For The DDJ-SB3 ; DDJ RB ; DDJ 400. Are designed as a CDJ Case which can be used to store Pioneer DDJ-SB3. DDJ RB ; DDJ 400. It also protects them from dust and other airborne pollutants that can destroy or damage your equipment. Will protect your gear comfortably, it is lightweight and easy to carry. 1\4 Black Laminate Ply Construction. Chrome Steel and Aluminum Hardware. Fully Foam Lined Interior. Chrome Recessed Lockable Latches. Height :7 (177.8mm). Width : 14(355.6mm). IF YOU HAVE ANY OTHER QUESTIONS, PLEASE LET US KNOW. POR FAVOR TOME EN CUENTA. SI TIENE ALGUNA OTRA PREGUNTA, POR FAVOR DEJANOS SABER. The item “LASE Euro Style Case For Pioneer DDJ-SB3, DDJ-RB, DDJ-400 Controller with GLIDE” is in sale since Friday, July 26, 2019. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Cases, Racks & Bags”. The seller is “zxpc” and is located in Miami, Florida. This item can be shipped worldwide.

• Model: LASE Pioneer DDJ -SB3 DDJ RB;DDJ 400
• To Fit: CDs/DVDs
• Material: 1/4″ Black Laminate Ply Construction.
• Type: LASE Euro Case
• Features: Flight/Road-Ready
• MPN: LASE DDJ -SB3 DDJ-400 Case
• Brand: LASE

]]> https://proaudioaccessories.com/2020/08/lase-euro-style-case-for-pioneer-ddj-sb3-ddj-rb-ddj-400-controller-with-glide/feed/ 0