https://proaudioaccessories.com Thu, 16 Jul 2026 20:44:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://proaudioaccessories.com/2023/10/rel-3-wire-sub-speaker-cable-neutrik-speakon-subwoofer-lead/ https://proaudioaccessories.com/2023/10/rel-3-wire-sub-speaker-cable-neutrik-speakon-subwoofer-lead/#comments Sun, 15 Oct 2023 19:28:10 +0000 https://proaudioaccessories.com/2023/10/rel-3-wire-sub-speaker-cable-neutrik-speakon-subwoofer-lead/




REL 3 Wire Sub Speaker Cable. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. A High Quality upgrade cable for’REL’ subwoofers manufactured using Genuine Neutrik Connectors and the world renowned Van Damme speaker cable. Ultra pure copper conductors, cutting edge PVC compounds, smooth signal transmission, toughness and flexibility. WIRING INFO FROM REL. High-level connection, using the enclosed cable with the Neutrik Speakon connector, is always the first choice. By connecting to the amplifier’s speaker outputs the sonic signature of the entire amplification chain is folded into the signal for the sub, thereby keeping timing and timbre cues consistent. In other words, the signal sent to the REL is the same signal sent to the speakers, allowing for seamless integration. This connection can be made without affecting the performance of the amplifier because the sub’s amplifier input impedance is 100,000 ohms. This scheme also avoids adding any detrimental effects by not interposing any additional electronics into the amplification chain. The standard high level hook up procedure is: attach the red wire to the amplifier’s right positive speaker output terminal; attach the yellow wire to the amplifier’s left positive speaker output terminal; attach the black wire to which ever of the amplifier’s ground output terminals is convenient; plug the Speakon connector into the sub’s high level input. For differential amplifiers using one sub, simply use the standard connecting scheme with the exception of connecting ground to chassis ground, not to speaker output ground, and then connecting into the high level input (Hi Input or Unbal Hi Input on Stentor III and Studio III). For differential amplifiers using two subs for each channel: connect red to positive; yellow to negative; and black to chassis ground; plug the Speakon into the balanced high level input (Bal Hi Input). Low-level connection, RCA inputs (or XLR on some models), is always an option, should high-level connection not be possible, or in a theatre system where both high-level and low-level connection should be used. When connecting to the low level inputs, connect a single RCA cable to the 0dB RCA jack. Additional gain can be achieved by connecting to the +12dB input. If you are connecting two channels of stereo output from a pre-amplifier, simply use a high-quality y-adaptor to sum the two signals together. The optimal position for a REL is in one of the corners behind the main speakers. This position provides 9 dB of mechanical amplification and allows for the most linear true low bass wave launch, owing to the ability to tune the sub to the axial node of the room, or longest throw distance. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/10/rel-3-wire-sub-speaker-cable-neutrik-speakon-subwoofer-lead/feed/ 0 https://proaudioaccessories.com/2023/10/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-2-core/ https://proaudioaccessories.com/2023/10/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-2-core/#comments Fri, 13 Oct 2023 03:31:11 +0000 https://proaudioaccessories.com/2023/10/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-2-core/



Van Damme PRO Black Series Tour Grade Speaker Cable. Touring Wire 2 core. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. Van Damme Black Series Tour Grade Speaker Cable offers a comprehensive conductor size and core count to accommodate almost all potential speaker signals. Available in 2 core. He ultra pure copper conductors, cutting edge PVC compounds and dynamic use focused construction provide accurate signal transmission, toughness and flexibility. Wide range of conductor counts & sizes. Reduced OD 2 x 2.5mm will fit XLR connectors and mono jacks. Multicore construction optimised for dynamic use. Ultra pure oxygen free copper for outstanding sonic integrity. Conductor – Bare ultra pure oxygen free copper. Overall jacket – Flexible PVC composite matt black RAL 9005. Working voltage – 300/500V. Test voltage – 2000V DC 1 minute. 2 x 1.50mm twin-axial. Overall diameter – 6.50mm. Weight – 70g p/m. Stranding – 30 x 0.25mm. Resistance – 12.30 Ohm/Km. 2 x 2.50mm twin-axial. Overall diameter – 7.60mm. Weight – 102g p/m. Stranding – 50 x 0.25mm. Resistance – 7.65 Ohm/Km. 2 x 4.00mm twin-axial. Overall diameter – 11.00mm. Weight – 230g p/m. Stranding – 50 x 0.30mm. Resistance – 4.50 Ohm/Km. 2 x 6.00mm twin-axial. Overall diameter – 14.00mm. Weight – 280g p/m. Stranding – 84 x 0.30mm. Resistance – 3.10 Ohm/Km. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/10/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-2-core/feed/ 0 https://proaudioaccessories.com/2023/09/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-4-core/ https://proaudioaccessories.com/2023/09/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-4-core/#comments Fri, 29 Sep 2023 22:08:12 +0000 https://proaudioaccessories.com/2023/09/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-4-core/



Van Damme PRO Black Series Tour Grade Speaker Cable. Touring Wire 4 Core. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. Van Damme Black Series Tour Grade Speaker Cable offers a comprehensive conductor size and core count to accommodate almost all potential speaker signals. Available in 2 core. 4 core, 6 core. The ultra pure copper conductors, cutting edge PVC compounds and dynamic use focused construction provide accurate signal transmission, toughness and flexibility. Matt black jacket for on stage use. 4mm multicores for high power & line array systems. Multicore construction optimised for dynamic use. Ultra pure oxygen free copper for outstanding sonic integrity. Conductor – Bare ultra pure oxygen free copper. Overall jacket – Flexible PVC composite matt black RAL 9005. Working voltage – 300/500V. Test voltage – 2000V DC 1 minute. 4 x 2.50mm multicore. Overall diameter – 10.25mm. Weight – 160g p/m. Stranding – 50 x 0.25mm. Resistance – 7.65 Ohm/Km. 4 x 4.00mm multicore. Overall diameter – 12.20mm. Weight – 275g p/m. Stranding – 127 x 0.20mm. Resistance – 4.60 Ohm/Km. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/09/van-damme-pro-black-series-tour-grade-speaker-cable-touring-wire-4-core/feed/ 0 https://proaudioaccessories.com/2023/08/mogami-2965-twin-coaxial-audio-video-cable-high-definition-75-ohm-shotgun-wire/ https://proaudioaccessories.com/2023/08/mogami-2965-twin-coaxial-audio-video-cable-high-definition-75-ohm-shotgun-wire/#comments Thu, 31 Aug 2023 05:39:13 +0000 https://proaudioaccessories.com/2023/08/mogami-2965-twin-coaxial-audio-video-cable-high-definition-75-ohm-shotgun-wire/



Mogami 2965 Twin Coaxial Audio Video Cable. High Definition 75 Ohm Shotgun Wire. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. Superflexible subminiature coaxial cables which cannot be found in MIL, JIS and other popular worldwide standards. There are lots of cases where those standard cables will not do the job. MOGAMI superflexible subminiature coaxial cables were originally made for custom applications, and remained in production thereafter, finding many applications all over the world. (mm): 2.6 diameter (0.102)Material: XLCPE. Conductor:Details: 20/0.12 OFCSize: 0.226mm(2) (#24AWG). Overall Shield:Type: ServedDetails: Approx. Capacitance at 1kHz, 20C: 65pF/m(19.8pF/Ft). Applicable Temperature: -20C +60C(-4F +158CEF). We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/08/mogami-2965-twin-coaxial-audio-video-cable-high-definition-75-ohm-shotgun-wire/feed/ 0 https://proaudioaccessories.com/2023/08/van-damme-xke-microphone-cable-balanced-xlr-mic-wire/ https://proaudioaccessories.com/2023/08/van-damme-xke-microphone-cable-balanced-xlr-mic-wire/#comments Tue, 29 Aug 2023 17:29:46 +0000 https://proaudioaccessories.com/2023/08/van-damme-xke-microphone-cable-balanced-xlr-mic-wire/


Van Damme XKE Microphone Cable. Balanced XLR Mic Wire. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. 2 Core and Screen, Silver Plated Copper Wire Cores, Copper Wire Screen. Van Damme Classic XKE Microphone is our standard balanced / stereo cable. As well as being elegant the inner cores of this cable are silver plated OFC (oxygen free copper) giving an awesome tonal quality. The thermoplastic outer screen together with the close lapped OFC wire inner screen, ensure excellent noise rejection and durability. This cable is tough, durable and easy to coil, it is the professional cable choice for gigging and touring. 2 Core and Screen relates to the amount of carrier signals inside the cable, in this case three. This is a balanced/stereo cable. The 2 cores are the signal carriers and the screen is the ground/shield. Material Bare silver plated ultra pure oxygen free copper wire. Stranding 7 x 0.10mm. Material Bare ultra pure oxygen free copper wire. Stranding 21 x 0.10mm. Material XLPE Cross linked polyethylene. Diameter 1.60mm ±0.10. Colour coding Red, Blue. Twisted pair with cotton yarn fillers & paper wrap. Screen type 80 x 0.10mm close lap spiral bare oxygen free copper wire. Jacket- Material Flexible PVC/Neoprene composite. Average thickness: 1.40mm. Overall diameter: 6.35mm ±0.15. Heat shock test: 120 ºC x 1 hour – no cracks. Test voltage: 1000 Vdc x 1 minute OK. Insulation: M Ohm/Km >5000. Core to core pF/m 56 nominal. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/08/van-damme-xke-microphone-cable-balanced-xlr-mic-wire/feed/ 0 https://proaudioaccessories.com/2023/08/van-damme-pro-grade-xke-instrument-cable-best-guitar-hifi-bass-cord-wire-bulk/ https://proaudioaccessories.com/2023/08/van-damme-pro-grade-xke-instrument-cable-best-guitar-hifi-bass-cord-wire-bulk/#comments Sat, 12 Aug 2023 14:56:24 +0000 https://proaudioaccessories.com/2023/08/van-damme-pro-grade-xke-instrument-cable-best-guitar-hifi-bass-cord-wire-bulk/


Van Damme PRO Grade XKE Instrument Cable. Best Guitar HiFi Bass Cord Wire Bulk. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. Unbalanced/Mono, Instrument Cable, Black. 1 Core and Screen, Copper Wire Core, Copper Wire Screen. Van Damme Pro Grade Classic XKE Instrument is our standard Guitar / Instrument cable. It offers an excellent tonal quality with the high frequencies being bright and shiny and low frequencies round and warm. It is also a very elegant cable. The thermoplastic outer screen coupled with the close lapped oxygen free copper wire inner screen, ensure excellent noise rejection and durability. Ideal for on stage use with all instruments; guitars, keyboards and other unbalanced output devices. 1 Core & Screen relates to the amount of carrier signals inside the cable, in this case two. This is an unbalanced/mono cable. The first carrier signal is the information signal and the second is the ground/shield. Material – Bare silver plated ultra pure oxygen free copper wire. Stranding – 3 x 0.20mm. Material – Bare ultra pure oxygen free copper wire. Stranding – 4 x 0.20mm. Material – Foamed Polyethylene. Diameter – 1.60mm ±0.10. Type – 0.40mm conductive thermoplastic. Type – 80 x 0.10mm close lapped oxygen free copper wire. Material – Flexible PVC/Neoprene composite. Average thickness – 1.70mm. Overall diameter – 6.00mm ±0.15. Physical properties un-aged Jacket (at 60ºC). Tensile strength – >8N/mm2. Heat shock test – 120 ºC x 1 hour – no cracks. Test voltage – 1000 Vdc x 1 minute OK. Insulation M Ohm/Km >5000. Capacitance Core to shield pF/m. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/08/van-damme-pro-grade-xke-instrument-cable-best-guitar-hifi-bass-cord-wire-bulk/feed/ 0 https://proaudioaccessories.com/2023/08/sommer-octave-tube-microphone-cable-7-pin-xlr-mic-to-psu-screened-wire-200-018/ https://proaudioaccessories.com/2023/08/sommer-octave-tube-microphone-cable-7-pin-xlr-mic-to-psu-screened-wire-200-018/#comments Sat, 12 Aug 2023 02:51:10 +0000 https://proaudioaccessories.com/2023/08/sommer-octave-tube-microphone-cable-7-pin-xlr-mic-to-psu-screened-wire-200-018/



Sommer Octave TUBE Microphone Cable. 7 Pin XLR Mic to PSU. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. We step on it.. With our SC-OCTAVE TUBE, which has been especially developed for the connection of tube microphones. It has a total of 7 wires, two for power input and the remaining ones for parameter-variable directivity, sensing (measuring), heating, and power for the tube capsule. These five wires are made up of 72 superfine individual 0.05 mm wires and guarantee linear transmission and high flexibility. With 100 % opaque shielding (copper spiral + AL-fleece) the SC-OCTAVE TUBE is protected against all kinds of interference. It is ideal for the connection of Neumann, BPM, or Schoeps Microphones. Audio and power signal in one cable. 100 % interference protection. High quality, linear transmission. Connection of tube microphones. Application as a high quality control cable. Jacket, diameter – PVC 6,5 mm. AWG – (audio) 26. AWG – (control) 20. Of inner conductors – (audio) 5 x 0,14 mm. Of inner conductors – (control) 2 x 0,50 mm. Copper strand per conductor – (audio) 72 x 0,05 mm. Copper strand per conductor – (control) 64 x 0,10 mm. Conductor insulation – PE. Shielding – copper spiral shielding tin-plated + AL-fleece. Shielding factor – 100 %. Per 1 m – 69 pF. Per 1 m – 120 pF. Resistance per 1 km – (audio) 140 Ohm. Resistance per 1 km – (control) 39 Ohm. Resistance per 1 km. Resistance per 1 km – > 200 MOhm. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/08/sommer-octave-tube-microphone-cable-7-pin-xlr-mic-to-psu-screened-wire-200-018/feed/ 0 https://proaudioaccessories.com/2023/08/mogami-2549-22awg-balanced-cable-shielded-hi-end-mic-xlr-trs-wire/ https://proaudioaccessories.com/2023/08/mogami-2549-22awg-balanced-cable-shielded-hi-end-mic-xlr-trs-wire/#comments Thu, 10 Aug 2023 14:39:57 +0000 https://proaudioaccessories.com/2023/08/mogami-2549-22awg-balanced-cable-shielded-hi-end-mic-xlr-trs-wire/



Mogami 2549 #22AWG Balanced Cable. Shielded Hi-End Mic XLR TRS Wire. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. W2549 has been designed using our famous Neglex OFC to provide the highest quality audio reproduction in any recording application. It features #22AWG conductors and extremely low capacitance. The 100% coverage served shield and twisted pair construction is excellent at preventing noise caused by electromagnetic interference. This cable is recommended when extended high frequencies are important or where long cable runs may be needed. Of Conductor – 2. Conductor Size (mm²) – 0.339mm² (#22AWG). (mm) – 6.0ø (0.236). Flex Life – 14,500 cycles. Tensile Strength – 657 N. Conductor – 30/0.12 OFC. (mm) – 1.9ø (0.075). Material – XLPE (Cross-Linked Polyethylene). (mm) 6.0ø (0.236). Material – Flexible PVC. Weight per 200m Roll – 11kg. DC Resistance at 20°C. Shield – 0.013? Capacitance at 1kHz, 20°C – Core to Screen – 76pF/m(23pF/Ft). Inductance between conductors at 1kHz. 20°C – 0.8µH/m(0.24µH/Ft). Electrostatic Noise – 50mV Max. Electromagnetic Noise – 0.15mV Max. Load – 30m V Max. Voltage Breakdown – Must withstand at DC 125V/15sec. Insulation Resistance – 100000 M? At DC 125V, 20°C. Emigration – Non-emigrant to ABS. Applicable Temperature – -20°C? Cable Type – Analogue Audio – Balanced. Cable Conductor – 0.339mm² (#22AWG). Cable Resistance – DC Resistance at 20°C. Cable Capacitance – Capacitance at 1kHz, 20°C – Core to Screen – 76pF/m(23pF/Ft). Cable Screening – Spiral Copper. Overall Diameter – 6.0mm (0.236). Cable Jacket – Flexible PVC. We are a UK based company specialising in the production of high quality’custom’ cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! On custom cable orders is a 3-5 day service. UK Next Day Guarantee. Is’same day dispatch’ on orders placed before 12pm, and delivered via Next Day Courier. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability. All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards. We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf. Data Cabling (Digital) + CV.

]]> https://proaudioaccessories.com/2023/08/mogami-2549-22awg-balanced-cable-shielded-hi-end-mic-xlr-trs-wire/feed/ 0 https://proaudioaccessories.com/2019/02/ae1-12-gauge-8-conductor-speaker-snake-wire-100-feet-ft-cable-fast-shipping/ https://proaudioaccessories.com/2019/02/ae1-12-gauge-8-conductor-speaker-snake-wire-100-feet-ft-cable-fast-shipping/#comments Tue, 26 Feb 2019 07:05:13 +0000 http://proaudioaccessories.com/2019/02/ae1-12-gauge-8-conductor-speaker-snake-wire-100-feet-ft-cable-fast-shipping/





High Performance Speaker Cable Excellent Quality! 12 Gauge 8 Conductor High Performance Speaker Cable (100 FT). Each Conductor is color coded: White, Black, Red, Green, Yellow, Orange, Brown and Blue. Outer Jacket: Black Matte Rubber. Plastic or wooden spool. The item “AE1 12 Gauge 8 Conductor Speaker Snake Wire 100 Feet ft Cable FAST SHIPPING” is in sale since Monday, December 7, 2015. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Cables, Snakes & Interconnects”. The seller is “hotbeatnewyork” and is located in Jamaica, New York. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam, Uruguay.

• Type: Snake/Multicore Cable
• Suited For: Instrument
• Connector(s) A: None/Raw
• MPN: DJC12-100-8CC
• Connector(s) B: None/Raw
• Brand: AEI
• Cable Length: 100 ft
• Split/Duplication: Unlimited
• Model: DJC12-100-8CC
• Country/Region of Manufacture: China
• Country of Manufacture: Unknown
• Number of Conductor: Multi, 8
• Gauge: 12
• Color: Black, Multi-Color

]]> https://proaudioaccessories.com/2019/02/ae1-12-gauge-8-conductor-speaker-snake-wire-100-feet-ft-cable-fast-shipping/feed/ 0 https://proaudioaccessories.com/2018/11/100ft-foot-12ga-gauge-8conductor-pro-audio-high-power-speaker-cable-wire-snake/ https://proaudioaccessories.com/2018/11/100ft-foot-12ga-gauge-8conductor-pro-audio-high-power-speaker-cable-wire-snake/#comments Tue, 27 Nov 2018 19:39:44 +0000 http://proaudioaccessories.com/2018/11/100ft-foot-12ga-gauge-8conductor-pro-audio-high-power-speaker-cable-wire-snake/






100ft foot 12ga gauge 8conductor PRO AUDIO HIGH POWER SPEAKER CABLE WIRE SNAKE. PRODUCT CONDITION AND SPECIFICATIONS. High Performance Speaker Cable Excellent Quality! 12 Gauge 8 Conductor High Performance Speaker Cable (100 FT). Each Conductor is color coded: White, Black, Red, Green, Yellow, Orange, Brown and Blue. Outer Jacket: Black Matte Thick Rubber. The item “100ft foot 12ga gauge 8conductor PRO AUDIO HIGH POWER SPEAKER CABLE WIRE SNAKE” is in sale since Friday, January 13, 2017. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Cables, Snakes & Interconnects”. The seller is “hotbeatnewyork” and is located in Jamaica, New York. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam.

• Conductor size: 12 gauge
• Number of conductors: 8
• Suited For: Speaker/Amplifier
• Color: Black
• Cable Length: 100ft.
• MPN: Does Not Apply
• Brand: AEI New York

]]> https://proaudioaccessories.com/2018/11/100ft-foot-12ga-gauge-8conductor-pro-audio-high-power-speaker-cable-wire-snake/feed/ 0