This listing includes a Rode NT1-A, Focusrite Scarlett 2i2, Primacoustic VoxGuard and Tripod Mic Stand. The RODE NT1-A is a large-diaphragm side-address condenser microphone intended for general instrument and vocal recording. The mic features a 1 diaphragm with a gold-plated membrane, which provides a wide frequency response and exceptional signal-to-noise ratio. The cardioid polar pattern provides excellent off-axis rejection, minimizing noise caused by room ambiance, instruments, monitors, headphones, etc. The balanced, transformerless output circuitry results in quiet, low-noise signal reproduction at high output levels. The NT1-A is powered via 48V phantom power and has a standard XLR connector. The bundled accessory package includes a studio-grade shock mount with an integrated pop filter, a 20′ premium cable, and a dust cover. It also has a bonus DVD presented by Rode founder and president, Peter Freedman. The DVD covers a variety of tips and techniques to help you get the most out of your NT1-A. The 1 diaphragm provides a wide frequency response and excellent signal-to-noise ratio. The cardioid polar pattern of the NT1-A effectively minimizes off-axis noises such as room ambiance, monitors, and off-axis instruments. The transformerless output electronics result in quiet, noise-free output while maintaining maximum signal gain. The mic uses standard 48V phantom power, which is supplied through the standard XLR connector. Externally Polarized 1 Condenser. > 132dB (per IEC268-15). > 88dB (1kHz; per IEC651, IEC268-15). Maximum Input Sound Level. 7.6 x 2 (190 x 50mm). 11.3 oz (320g). What comes in the Box? RODE SM6 Shock Mount/Pop Filter. 20′ Premium XLR Cable. The Scarlett 2i2 from Focusrite is a 2 input, 2 output portable USB recording interface featuring two Focusrite preamps, housed in an anodized aluminum unibody chassis that is solid enough to take on the road. The preamps offer transparent, low-noise and low-distortion performance with sufficient available headroom for using moving coil, condenser or ribbon microphones. Phantom power is switchable. The front-panel Neutrik combo connectors can used to connect both line and instrument level signals as well as microphones. This makes it perfect for recording the output of a synthesizer or stage piano, while a flick of a switch caters for the output of an electric or acoustic guitar. Halo signal indicators help with maintaining correct levels. Red indicates a clipping signal, and with reduced gain the lights will momentarily turn amber before returning to green. A large monitor dial provides control over the output level being sent to monitor speakers, while a high-quality amplifier provides a clean yet loud signal to headphones. A direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs, allowing for zero-latency monitoring. The included Scarlett Plug-In suite provides EQ, compression, gate and reverb processing, and is cross-platform compatible with all major DAWs. Light and compact portable interface that easily fits in a laptop bag. Two Focusrite microphone preamps (same design as those on the Saffire PRO 40 and Liquid Saffire 56). Excellent digital performance with 24-bit resolution at sample rates of up to 96KHz. Rugged anodized aluminum unibody chassis provides protection against the harsh environment of the road. Bus powered – no need of an additional power supply. Includes Ableton Live Lite 8 software, as well as the company’s Scarlett plug-in suite providing EQ, compression, gate and reverb and compatible with all major DAWs. Gain knobs with surrounding halo indicators for each input (red indicates a too hot signal). Direct monitor switch on the front panel allows for hearing what is being recorded through speakers or headphones, without the signal having to go through the computer (avoids latency). Fully tested with Mac OS X 10.7, Lion. 44.1, 48, 88.2 and 96kHz. 2 x XLR/TRS combo Microphone/Line/Instrument. Microphone: -3dBu Instrument: -3dBu Line: +20dBu. Microphone: +10dB to +55dB Instrument: +10dB to +55dB Line: +10dB to +35dB. What is in the Box? Ableton Live Lite 8 Software. Focusrite Scarlett Plug-In Suite. The VoxGuard Nearfield Audio Absorber from Primacoustic is an ideal tool for improving the quality of vocal recordings. It attaches to your mic stand to surround your microphone, reducing unwanted sounds. The VoxGuard has an open-cell acoustic foam liner that creates an acoustic boundary around the mic that contains the voice while simultaneously eliminating room reflections. The VoxGuard features is lightweight and easy-to-use, featuring a high-impact ABS outer surround shell that fits onto a mic stand with an included adapter. Unlike similar products that are made from steel, the VoxGuard can be placed easily on a variety of mic stands without fear of falling over. It also features a rear access cable port, allowing the mic to be articulated and directed at a specific sound source for versatile recording. The VoxGuard is also 50% larger than similar offerings, to significantly reduce noise and improve performance. The VoxGuard includes a set of Primacoustic’s TriPad microphone stand isolators. These handy pads decouple the mic stand from the floor, making sure that your microphone isn’t subject to any vibration. You’ll notice less rumble and movement noise in your tracks right away. Reduces unwanted sounds while simultaneously keeping vocals in, ideal for clean vocal recordings in studios, TV post production, podcasting, and more. The open-cell acoustic foam liner creates an acoustic boundary around the mic that contains the voice while simultaneously eliminating room reflections. The high-impact ABS outer shell makes the VoxGuard lightweight and easy to use. The included adapter lets you attach it to a variety of mic stands without fear of tipping. The rear access cable port allows the mic to be articulated and directed at a specific sound source for versatile recording. The VoxGuard is 50% larger than similar offerings, so it can significantly reduce noise and improve performance. What comes with the unit? TriPad Microphone Stand Isolators (Set of 3). Threaded Mic Stand Adapter and Knurled Ring. The following pertains to our listing terms and conditions. Please read so there is no surprises as to the total cost of your item or any of our polices. Do you sell to international buyers? We ask that you save all the original packaging. Are all items new? All of our auctions are for new items unless otherwise specified by Open Box or Used. Not all Open Box items have been used, this simply indicates either the box has been opened or the packaging has been slightly damaged. Add this to your listing for free. Get Vendio Gallery – Now FREE! The item “RODE NT1-A Studio USB Interface Kit Scarlett 2i2 + VoxGuard + Tripod Mic Stand” is in sale since Wednesday, January 01, 2014. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems”. The seller is “dvestore” and is located in Mukilteo, Washington. This item can be shipped worldwide.
- Brand: Focusrite
- MPN: 2i2