Car Audio & Video. Package: BBE 882I Rack Mount Sonic Maximizer Sound Processor + Rockville RCM03 Pro Studio Recording Condenser Microphone Mic With High Quality Metal Construction and Shock Mount. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) BBE 882I Professional Rack Mount Studio Sonic Maximizer Signal Sound Processor. (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Authorized BBE Internet Dealer! The 882i unit features dual-mono operation with balanced XLR inputs and outputs. It is designed for applications requiring low noise, high headroom and +4dBu input levels. Pro and semi-pro sound reinforcement. +4dBu balanced line (1/4 tip-ring-sleeve and XLR inputs and outputs). Bypass switch for comparison of processed to unprocessed signal. Process Mode: Program controlled. Bypass Mode: 10Hz to 50kHz, +/- 0.5dBu, 0dBu input. Signal to Noise Ratio: 115dB Process IN. THD, Process mode: less than 0.025% 20-20kHz. Bypass mode: less than 0.002% 20-20kHz. Maximum Output: +23dBu (may vary due to control settings). Pin #2 is the hot or “+” signal. Sensitivity: -45dBu for maximum process. Maximum Process: +12dBu boost at 5kHz, 0dBu input. Lo Contour: +12dBu adjustment at 50Hz, 0dBu input. Unboxing Video of RCM03. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. Multi-Purpose Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The aluminum construction makes the RCM03 tough enough for Live sound applications as well! This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer! Quality built inside and out! The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ 20KHZ! The mic sounds crystal clear sound with no distortion! The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers. The last thing that I need to mention and call out is that our product is very sturdy. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises. RCM03 Condenser Microphone made of aluminum! 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power. Metal Anti-wind foam cap. Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer). Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ). Output impedance: 200±30%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500A. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Response: 30Hz – 20 KHz. Fixed Crossover Filter cutoff frequency: 40Hz—16 KHz. Load impedance: Greater or = to 1000 Ohms. Equivalent Noise level: Less than 18dB A (IEC581-5). Input SPL: 126dB(THD1.0% at 1kHZ). Electrical current: Greater than 4.8Ma. Microphone body net weight320 Grams (0.7 Pounds). Diameter 44mm (1.73 inches). Microphone Length 217mm (8.54 inches). Microphone material: steel grille + Alluminum (handheld part). PCB Layout: Surface mount. About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. Process for returning items. The item “BBE 882I Professional Sonic Maximizer Signal Sound Processor + Studio Microphone” is in sale since Thursday, November 9, 2017. This item is in the category “Musical Instruments & Gear\Pro Audio Equipment\Signal Processors/Rack Effects”. The seller is “audiosavings” and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

• Brand: BBE
• MPN: 882I+RCM03
• UPC: 613815880592
• Form Factor: Rack-Mountable
• Number of Channels: 2
• Inputs/Outputs: 6.35mm (1/4″) TRS/TS In
• Country/Region of Manufacture: China
• Type: Single-Effect Processor
• Effect/Enhancement: Compression/Limiting
• Model: 882I+RCM03