CHECK OUT OUR OTHER BINAURAL MICROPHONE LISTINGS! Low cost true 3D binaural microphone kit! Attractive GREEN SR3D Logo. (we will update the photo soon). Added a new standard tripod thread on top of the tube for accessories. Register your serial number and leave us a review for a two-year guarantee. Price includes 20% VAT. BE SURE TO READ THIS DESCRIPTION FULLY! WE HIGHLY RECOMMEND THE PRIMO OPTION UNLESS YOU ALREADY HAVE OUR STEREO PAIR PRIMO MICS. Please see the assembly video below to see how easy the setting up is – best if you have finger nails for installing the grommet! There’s now no need to fill the inside the tube, as we put cotton wool behind the capsules. 2 SR3D ears 1 Microphone Tube 2 Standard microphones (not Primo EM272, please see our other listing for Primo EM272 version) 1 microphone stereo splitter. 1 Grommet for microphone wire hole. This is a DIY microphone that you can assemble yourself. It comes with holes pre-made in the tube and ears, and the microphones are a tight push fit into the ears. We now assemble the adapter nut for you and have added an extra hole for the wire to come out of the bottom of the microphone, it has a soft silicone rubber stop that can be swapped to the rear hole if you want to use the different hole for the wire exit. To assemble the microphone, simply push the connector jack through the ear, being sure NOT to pull on the wires. Fit one ear and then fit the last ear. The ears are a firm push fit into the tube and won’t fall out. The grommet is for the hole at the rear of the microphone, through which you should pass the mic wires before installing the grommet. It is a tight fit, but will go in. If you experience noise when connecting the microphone directly to a computer via the microphone input on your sound card, try running on battery power if you are using a laptop. Alternatively, you can use our USB adapter, which has stereo input and 24bit 48kHz capabilities. Please note that if you are plugging the microphone into a computer, the microphone input must be stereo or you will need to use the USB adapter for stereo recording. This microphone weighs about 450g and uses plug-in-power from your recorder, computer, or camera with a stereo microphone socket. International deliveries can take between 7 and 14 days. +44 74 8888 3147. And open them up in YouTube or use Google Chrome. SR3D binaural kit review. Video will open in a new window. Using the mobile app?