Superb condition as shown. Light studio use only. Great for brass, reeds, piano, acoustic bass, snare, toms and violin. Comes with the AT8542 Power Module, plus manual, pouch and tested. Supplied with Audio-Technica’s versatile UniMount® clip, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, reeds, piano, snare, toms, violin and all percussive instruments. With its compact and discreet design, the ATM350 is able to fin into smaller spaces. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. Crisp, clear, well-balanced response, even at high SPLs. Low-pro le design for minimum visibility. UniMount® clip permits accurate positioning, provides shock resistance and protects element. Interchangeable elements available for hypercardioid and omnidirectional polar patterns. Product designed and made in Japan. Element Fixed-charge back plate permanently polarized condenser. Frequency Response 40 – 20,000 Hz. Low Frequency Roll Off 80 Hz, 12 dB/octave. Open Circuit Sensitivity -49 dB (3.5 mV) re 1V at 1 Pa. Maximum Input Sound Level 149 dB SPL, 1 kHz at 1% T. Dynamic Range 122 dB, 1 kHz at Max SPL. Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa. Phantom Power Requirements 11-52V DC, 3.5 mA typical. Weight Microphone: 14.5 g (0.5 oz). Power module: 81.2 g (2.9 oz). Cable 4.0 m (13.1′) long (permanently attached to microphone), 3.2 mm (0.13) diameter, 2-conductor shielded cable with TA3F-type connector. Dimensions Microphone: 37.8 mm (1.49″) long, 12.2 mm (0.48″) diameter. Power module: 92.9 mm (3.66″) long, 18.9 mm (0.74″) diameter. Output Connector Power module: Integral 3-pin XLRM-type. Accessories Included AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch. Phantom power only in-line power module, with low frequency roll-off, input on TA3M, output on integral XLRM 3-pin.